Mix Repairs

Neff Tumble Dryer Error Codes Explained

a happy woman tries out her repaired tumble dryer

Do you have a Neff tumble dryer that is displaying various error codes but you don’t know what they mean? Don’t worry! We are here to make your life a little easier. This handy guide shows you what the various Neff tumble dryer fault symbols mean and ways in which you can troubleshoot the errors. So, without further ado, let’s explore these in more detail below. 

Neff tumble dryer error codes

Neff is a brand that’s well known for its quality appliances. And their tumble dryers are no exception. However, for various reasons (which we’ll explore in more detail soon), your tumble dryer may not be performing optimally or at all. Here’s what you need to know:

E01 and E02

An error code E01 and E02 indicate that you have a blocked fluff filter and that this needs to be cleaned. It could be caused by fabric softener residue or fluff. Therefore, check the vents and remove any excess debris and lint from the fluff filters after each drying cycle, while ensuring that the tumble dryer is completely switched off and unplugged from a power source. It’s also advisable to rinse out the fluff filter once in a while with warm water. 

E06

An E06 error code indicates that there is a fault with the heating circuit. You should not attempt to resolve this issue by yourself and you should rather call in an experienced appliance engineer for this. 

E08, E09, E24, E25, E28 and E90

Each of these error codes signals a fault with the electronics or sensor that has been detected. These types of faults can only be addressed by an experienced professional. 

E15

A Neff tumble dryer error code E15 on your display indicates the anti-flood device at the base of the appliance has been activated. To troubleshoot this problem, you should unplug the appliance from its power source, take the cover below the door off, take the insulation out of the way, remove any water in the base, replace the cover and insulation, switch the power back on and try the appliance to see if it works again. If this doesn’t solve the issue, the wiring or control board may be faulty. It’s advisable to check the float and the switch and if they do not work, to call in an experienced professional.

Other Neff tumble dryer problems

The filter or filter display is lit or flashes

This is an indication that the fluff filter has become blocked and that it should be cleaned after each drying cycle. Also advisable is to occasionally rinse out this filter with warm water. 

Other error code/signal appears on the display

This is possibly due to a technical fault that has occurred or a programme was interrupted. For the best DIY solution, switch off and restart the appliance. This is likely to rectify an incorrect operation and could result in the removal of the error code or signal and is possibly the easiest way to go about and do Neff tumble dryer troubleshooting.

In conclusion

Your Neff tumble dryer is an important appliance in your household and it needs to run smoothly so that you have peace of mind and can enjoy the convenience it offers. But when your tumble dryer is giving you issues and you are unable to resolve them yourself, such as your Neff tumble dryer is not draining, then it’s time to call in the pros. At MIX Repairs, you can enjoy complete peace of mind that your tumble dryer will work efficiently once again as our experienced technicians employ safe and effective repair methods. Rely on us to take your worries away and let you enjoy the convenience of your tumble dryer once again. 

Neff Tumble Dryer Error Codes Explained was last modified: January 12th, 2024 by Mix Repairs
Exit mobile version